Subject	Because the ECU connector is downstream from the injectors
Posted by	300zx90 (CO) on July 31, 2006 at 9:30 AM
	This message has been viewed 903 times.
In Reply To	why not just repin it at the ecu connector? (n/m) posted by aliaZ on July 30, 2006 at 11:27 PM
Message	More info here. Swapping pins on the ECU connector will have no affect on the power source for the injectors. The ECU provides a ground switch for each injector, not the power source. ________________________________________ NA to TT, starting from the ground up... Proper check valve inspection per the FSM...
Follow Ups	How-To: Injector Switched Power Line Using Fuse Box Tap - jzack 00:02:31 07/30/06 Re: How-To: Injector Switched Power Line Using Fuse Box Tap - Slobo7x 10:28:41 07/30/06 Yes - when I cut the constant 12v going to the injector, - jzack 10:58:18 07/30/06 Re: Yes - when I cut the constant 12v going to the injector, - Slobo7x 17:06:02 07/30/06 Yes - someone a long time ago posted that the common - jzack 19:36:26 07/30/06 why not just repin it at the ecu connector? (n/m) - aliaZ 23:27:36 07/30/06 details? (n/m) - zgene4 00:12:13 07/31/06 Because the ECU connector is downstream from the injectors - 300zx90 (CO) 09:30:45 07/31/06 ok...thanks (n/m) - aliaZ 16:04:08 07/31/06 Where exactly did you splice your switched 12v into the - Audioquest 15:17:49 08/01/06 2nd - TheSlimOne 11:40:09 08/28/06 Alternate power source for cleaner install - Jehannum 09:04:07 08/28/06
Post a Followup	You cannot reply to this message because you are not logged in.