Subject	Rear toe angle bushing...I've got a twin turbo and
Posted by	not4resaleZ on April 30, 2026 at 5:15 PM
	This message has been viewed 123 times.
Message	I need to replace the bushing in the knuckles where HICAS attaches. My HICAS delete kit uses an arm that gets rid of the stock ball joint, so I figured that I could use the N/A bushing. I thought that 55152-RS520 would work, but it does not appear to be made for that knuckle. Are the N/A knuckles different from turbo, and what bushing could I use?
Follow Ups	Rear toe angle bushing...I've got a twin turbo and - not4resaleZ 17:15:55 04/30/26 I ran into this myself with poly bushings - Polishzx 02:45:30 05/01/26 Thanks for your response. I remember that string of posts - not4resaleZ 15:57:53 05/01/26 Very interested in what Whiteline will say on that - Polishzx 16:32:23 05/01/26 Re: Very interested in what Whiteline will say on that - VinZmax 08:55:04 05/05/26 Whiteline says that the 6218 bushing is no longer - not4resaleZ 17:19:09 05/10/26 Driftworks is the company that sold me my old delete kit. - not4resaleZ 11:03:40 05/11/26 Thanks for following up! - Polishzx 23:01:58 05/30/26 You can use the NA bushing with a thin metal sleeve. (n/m) - Bernie (NoVA) 11:10:50 05/02/26 Interesting solution. I've been around here long enough - not4resaleZ 14:30:54 05/02/26
Post a Followup	You cannot reply to this message because you are not logged in.