Subject	pressure gauge cause issues?
Posted by	komplexZTT on May 30, 2024 at 8:21 AM
	This message has been viewed 64 times.
In Reply To	Base Fuel Pressure Issue: Walbro 485 and Tomei FPR posted by komplexZTT on May 23, 2024 at 07:20 AM
Message	I noticed on the Tomei install manual it says to remove and plug pressure gauge port after you set it....curious why they wouldn't want it permanently installed, could their design be impacted by permanent gauge plumbed in? Tomei manual 2+2=4; 2+0=2; 4>2 : 2+2 > 2+0.
Follow Ups	Base Fuel Pressure Issue: Walbro 485 and Tomei FPR - komplexZTT 07:20:31 05/23/24 Lets Talk about the Basics. - Cjw3 08:35:03 05/23/24 thanks for the input! - komplexZTT 08:41:28 05/23/24 visual inspection on hard lines look ok - komplexZTT 17:17:34 05/25/24 return line test results>> - komplexZTT 09:24:40 05/30/24 pressure gauge cause issues? - komplexZTT 08:21:20 05/30/24 Have you looked at the pump yet? - zwzweston 14:55:37 06/08/24 I did replace the strainer - komplexZTT 06:56:06 06/11/24
Post a Followup	You cannot reply to this message because you are not logged in.