Subject	Re: Clutch pedal engagement question
Posted by	Rob260 on December 22, 2023 at 4:07 PM
	This message has been viewed 145 times.
In Reply To	Clutch pedal engagement question posted by Humble-Zed on December 21, 2023 at 09:22 AM
Message	There is an adjustment procedure in the FSM that's fairly straightforward. No disrespect to SZ but from my own experience there doesn't seem to be any benefit in deviating from the factory procedure unless you're running a big multiplate. If you don't have a Factory Service Manual you can download one form the tech seciton at [ www.aus300zx.com ]
Follow Ups	Clutch pedal engagement question - Humble-Zed 09:22:15 12/21/23 As long as you still have some free play at the top... - Ted (92TT) 11:40:30 12/21/23 Re: As long as you still have some free play at the top... - Humble-Zed 12:45:25 12/21/23 Yes but use your hand to check the pedal play, not RPMs... - Ted (92TT) 14:43:43 12/21/23 Re: Clutch pedal engagement question - Humble-Zed 12:47:53 12/21/23 Might be the neutral safety switch at top of pedal. (n/m) - Ted (92TT) 14:45:39 12/21/23 Re: Might be the neutral safety switch at top of pedal. - Humble-Zed 21:37:13 12/21/23 Re: Clutch pedal engagement question - Rob260 16:07:12 12/22/23 Thanks Rob, nice to have an electronic copy too (n/m) - Denis 18:24:00 12/22/23 There should be a green plastic pad on the clutch assembly - spicyZ 15:26:04 01/04/24
Post a Followup	You cannot reply to this message because you are not logged in.