Subject	I'd have to agree with this. I also noted it's a pain to
Posted by	Woodnutz (PA) on August 17, 2023 at 8:40 AM
	This message has been viewed 143 times.
In Reply To	I would personally go with a good used OEM one. posted by Drk93TT on August 16, 2023 at 07:05 AM
Message	pull the UR crank pulley. I'm sure there's a better tool, but with what I call a "regular" puller (3-arm generic type), I had to get creative in preventing the claws from slipping out of the holes. I couldn't get it to grab the outer diamater edge without damaging it. Aluminum = less forgiveness when applying leverage. I suspect the next time I have to pull it, I'll put the OEM piece back on. - Aaron
Follow Ups	Which harmonic balancer to buy - Hiruzaiz32 18:02:17 08/15/23 this is what i use. - slayer fan 19:39:14 08/15/23 I've been looking around, the one I want the most isn't - Polishzx 20:13:58 08/15/23 I would personally go with a good used OEM one. - Drk93TT 07:05:35 08/16/23 I'd have to agree with this. I also noted it's a pain to - Woodnutz (PA) 08:40:19 08/17/23 Clean used stock unit. (n/m) - Bernie (NoVA) 09:08:16 08/16/23
Post a Followup	You cannot reply to this message because you are not logged in.