Subject	Rough Idle Help
Posted by	Gagej on August 02, 2021 at 2:50 PM
	This message has been viewed 186 times.
In Reply To	Beginner Drift build posted by Gagej on July 30, 2021 at 10:42 PM
Message	I did some reading and 93 NAs are the first year with the new style injectors. This is good news but puts me back to the drawing board on what’s causing the idle issue. I still plan on dremmeling the plenum to make getting to the injectors easier. Should I go ahead and start testing each injector and coil pack to see if there are any bad ones?
Follow Ups	Beginner Drift build - Gagej 22:42:47 07/30/21 You got some reading to do - Cjw3 08:08:14 07/31/21 Re: You got some reading to do - Gagej 13:56:42 07/31/21 Engine Out is better - Cjw3 19:25:22 07/31/21 Is it a 2+2? The longer wheelbase will make it a better - MixManMash 17:40:16 08/01/21 Re: Is it a 2+2? The longer wheelbase will make it a better - Gagej 19:43:23 08/01/21 Yes it is. - Cjw3 06:51:44 08/02/21 Engine compartment is the same between coupe and 2+2 - ZXoltan 16:01:09 08/02/21 No, the power switched mod and PRVR delete are two separate - FrozTTy 15:37:58 08/02/21 Rough Idle Help - Gagej 14:50:43 08/02/21 Power Balance Test - FrozTTy 15:27:25 08/02/21 Re: Power Balance Test - Gagej 18:49:16 08/02/21 Update - Gagej 15:42:55 08/04/21 Injector Ohm Test - Gagej 22:48:00 08/04/21 Remove coil pack connector from injector - FrozTTy 11:11:38 08/05/21 Re: Remove coil pack connector from injector - Gagej 18:25:53 08/05/21 Look at all fuel hoses for leaks, that's usually why you'll - FrozTTy 10:41:09 08/06/21 Re: Look at all fuel hoses for leaks, that's usually why you'll - Gagej 21:57:20 08/12/21 Yes, that screw should turn easily so long as it's the right - FrozTTy 08:09:17 08/13/21 Re: Yes, that screw should turn easily so long as it's the right - Gagej 11:39:24 08/13/21 Update - Gagej 16:04:18 08/04/21
Post a Followup	You cannot reply to this message because you are not logged in.