Subject	Delete the FPCU, it will fail with the Walbro 485/Hellcat.
Posted by	platinumist on May 24, 2021 at 11:57 AM
	This message has been viewed 449 times.
In Reply To	Potential issues running larger fuel pump? posted by Buckaroo Banzai on May 22, 2021 at 05:09 PM
Message	Aftermarket regulator will be needed. I run a single 485 with the FPCU bypassed, Tomei FPR, fuel damper deleted, stock size lines (Gates barricade), stock fuel rail. Reliable 620 WHP, zero fueling issues. This is how Specialty Z told me to set up. Stock fuel lines will work fine up to a point. A common issue with fuel return has to do with the fuel pressure check valve failing. I don't exactly know the symptom of the failure, but I removed mine from the hangar, advised by Scott at ZShack.
Follow Ups	Potential issues running larger fuel pump? - Buckaroo Banzai 17:09:59 05/22/21 I agree that the stock fuel lines will have the potential - LitlElvis 20:47:07 05/22/21 Re: I agree that the stock fuel lines will have the potential - Buckaroo Banzai 12:35:58 05/23/21 Any reduction of restrictions will help, even if it's only a - LitlElvis 10:34:43 05/25/21 Re: I agree that the stock fuel lines will have the potential - Buckaroo Banzai 11:48:27 05/30/21 Email found :( Reply sent :) - LitlElvis 10:32:56 06/01/21 Delete the FPCU, it will fail with the Walbro 485/Hellcat. - platinumist 11:57:38 05/24/21 Re: Delete the FPCU, it will fail with the Walbro 485/Hellcat. - Buckaroo Banzai 11:50:09 05/30/21 Re: Potential issues running larger fuel pump? - Rob260 20:38:08 05/24/21 Re: Re: Potential issues running larger fuel pump? - Buckaroo Banzai 11:51:29 05/30/21
Post a Followup	You cannot reply to this message because you are not logged in.