Subject	No way to flush the pump as you suggest that I am aware >>>
Posted by	ZUL8TR on October 16, 2020 at 4:39 AM
	This message has been viewed 262 times.
In Reply To	Re: Ask the rebuilder what he did if he doesn't know that is>>> posted by aztec300z on October 15, 2020 at 02:52 PM
Message	Unfortunately you have a rebuilder that is shitting on you. Sounds like you have no warranty on his work! How to determine if pump new would require pulling pan and inspect and even that would be difficult because it could be a rebuilt (reman) not new. Have you started the engine yet? Does it have fresh oil and filter ? If there is debris in the pump and oil pan the oil filter will pick up most of it when run. So unless you pull the pan and check you just might have to run it easy and do a oil and filter change after a short collection of miles. Once pulled if interested you could cut the filter open a see what it picked up. ZUL8TR
Follow Ups	Oil pump - aztec300z 19:15:17 10/14/20 Ask the rebuilder what he did if he doesn't know that is>>> - ZUL8TR 05:24:48 10/15/20 Re: Ask the rebuilder what he did if he doesn't know that is>>> - aztec300z 14:52:04 10/15/20 No way to flush the pump as you suggest that I am aware >>> - ZUL8TR 04:39:02 10/16/20 Filter won't catch it all. There is a bypass in the oil - MixManMash 06:55:48 10/16/20 Agreed So what do you suggest? (n/m) - ZUL8TR 10:20:59 10/16/20 Don't connect an oil cooler on a new engine. - MixManMash 21:44:42 10/17/20 Thank you all very much (n/m) - aztec300z 19:36:25 10/21/20 A bit of work but how about pulling the timing belt parts - itsa300zx 11:13:26 10/16/20 What was supposedly done for the rebuild? (n/m) - ZUL8TR 12:55:28 10/16/20
Post a Followup	You cannot reply to this message because you are not logged in.