Subject	Re: boost leak testing and idle drop questions
Posted by	acetrebo on August 11, 2020 at 5:31 PM
	This message has been viewed 175 times.
In Reply To	boost leak testing and idle drop questions posted by acetrebo on August 10, 2020 at 12:45 PM
Message	Ok the boost issues are driving me nuts on this car. I was able to fix my idle drop issues, by adjusting the TPS, and playing around with the idle settings some. Now it still idles perfect, and doesn't stall. Also, I did the knock sensor bypass. When I was working on IAC, I must have broken a wire on the detonation sensor connector, and I fixed it. But then I tested the harness, and neither side had continuity. I had code 34. I bypassed knock sensor now no more code. However, I'm still only getting 7psi. I'm stumped. I cant find any leaks of substance, my knock sensor is bypassed, but still no boost. Im about to try to remove the boost jets and see if any difference. IDK. Im not sure where to go next. Ideas? Im also starting to wonder if the mod I did to disable the knock sensor, also disabled the wastegate selenoid, IDK. Its an easy remove, just one wire to disconnect.
Follow Ups	boost leak testing and idle drop questions - acetrebo 12:45:02 08/10/20 Re: boost leak testing and idle drop questions - acetrebo 19:58:49 08/10/20 aftermarket air filter? - scorp997 22:48:25 08/10/20 Or install it properly. - MixManMash 07:22:36 08/11/20 Re: aftermarket air filter? - acetrebo 10:04:49 08/11/20 Re: boost leak testing and idle drop questions - acetrebo 17:31:57 08/11/20 Re: Re: boost leak testing and idle drop questions - acetrebo 21:30:41 08/11/20
Post a Followup	You cannot reply to this message because you are not logged in.