Subject	yours appears to be correct. turning the valve to
Posted by	slayer fan on July 07, 2020 at 5:19 PM
	This message has been viewed 194 times.
In Reply To	I am using the harbor freight manifold gauges! posted by Polishzx on July 07, 2020 at 04:25 PM
Message	right will push down on the Schrader valve and open up flow for the refrigerant. word of caution, don't turn the valve all the way open. you don't want to damage the Schrader valve by forcing it all the way down. just turn it until you see flow or pressure.
Follow Ups	Struggling with A/C low cut sensor issue, any A/C experts? - Polishzx 21:52:00 07/05/20 The AC does not Pull the Refrigerant in - Cjw3 06:46:57 07/06/20 So I guess my issue is low pressure side is not taking charg - Polishzx 11:55:47 07/06/20 '94 is a Native R134.. Yes? - Cjw3 12:21:18 07/06/20 Correct, native r134a on a 94. It seems like the valves can - Polishzx 13:04:14 07/06/20 I would think the Clog would effect Vacuum - Cjw3 14:12:01 07/06/20 Schrader valve - megaDan 08:22:14 07/07/20 harbor freight manifold gauges? (n/m) - slayer fan 15:15:58 07/06/20 if so, my quick disconnects were mislabled for - slayer fan 15:31:01 07/06/20 I am using the harbor freight manifold gauges! - Polishzx 16:25:27 07/07/20 yours appears to be correct. turning the valve to - slayer fan 17:19:00 07/07/20 also, when adding r134,the high side valve on the - slayer fan 17:55:36 07/07/20 Re: Struggling with A/C low cut sensor issue, any A/C experts? - Metacom 21:01:07 07/06/20 Re: Struggling with A/C low cut sensor issue, any A/C experts? - xarcos 15:21:17 07/07/20
Post a Followup	You cannot reply to this message because you are not logged in.