Subject	Engine breakin with upgraded oil cooler
Posted by	nick.c on June 29, 2020 at 1:11 PM
	This message has been viewed 233 times.
Message	Hey guys, just finishing up a rebuild after I spun a bearing. I rebuilt the entire lower end with eagle rods / wiseco pistons. I have an upgraded oil cooler and im seeing things on the internet that says to bypass your oil cooler during breaking to prevent having to clear those lines and the cooler. Is this true? Has anyone done their engine breakin and left their oil cooler connected?
Follow Ups	Engine breakin with upgraded oil cooler - nick.c 13:11:28 06/29/20 You need to flush the hoses and cooler after an engine fail - Doug71zt(CAN) 22:24:12 06/29/20 Re: You need to flush the hoses and cooler after an engine fail - nick.c 11:02:41 06/30/20 Re: You need to flush the hoses and cooler after an engine fail - nick.c 11:27:34 06/30/20 New cooler system. No worries. (n/m) - Doug71zt(CAN) 17:48:20 07/01/20
Post a Followup	You cannot reply to this message because you are not logged in.