Subject	Re: Low compression on all 6 after doing full OEM gasket kit
Posted by	Cjw3 on May 14, 2020 at 3:07 PM
	This message has been viewed 181 times.
In Reply To	Low compression on all 6 after doing full OEM gasket kit posted by eldergolfer21 on May 14, 2020 at 01:41 PM
Message	Check your Cam Timing.. Your not off by a lot, and it just might be dry cylinders.. If the Cam Timing is Good, try a little Oil in the Bores and see what happens to pressures.. Did you Deck the Heads.. This will change the Cam Timing, and if a lot was taken off, You might need Adjustable gears to get the Cam Timing back Cj
Follow Ups	Low compression on all 6 after doing full OEM gasket kit - eldergolfer21 13:41:52 05/14/20 Re: Low compression on all 6 after doing full OEM gasket kit - Cjw3 15:07:21 05/14/20 Re: Re: Low compression on all 6 after doing full OEM gasket kit - eldergolfer21 20:14:58 05/14/20 OK.. this info helps - Cjw3 02:21:36 05/15/20 Re: OK.. this info helps - eldergolfer21 11:06:22 05/15/20 Re: Re: OK.. this info helps - Cjw3 12:01:47 05/15/20 Re: Re: Re: OK.. this info helps - eldergolfer21 13:04:17 05/15/20 Were both tests completed on a warm or cold engine? (n/m) - MixManMash 05:20:23 05/15/20 Re: Were both tests completed on a warm or cold engine? - eldergolfer21 11:07:15 05/15/20 Re: Low compression on all 6 after doing full OEM gasket kit - eldergolfer21 17:35:52 05/22/20 I would do a vacuum test then a smoke test it to see if >> - ZUL8TR 04:55:59 05/24/20
Post a Followup	You cannot reply to this message because you are not logged in.