Subject	Can the connector on the FICD solenoid be rotated?
Posted by	ZXRider on March 07, 2020 at 9:09 PM
	This message has been viewed 277 times.
Message	On my IACV, when the FICD solenoid is threaded on the IACV body, the FICD connector is aligned in a manner that makes the metal clip on the EFI connected point toward the transmission tunnel. It makes installing and removing the metal clip a pain in the ass. Can the FICD connector be rotated? If I put a gasket between the solenoid and the valve body to space the solenoid out and thus make it align different, would it make the plunger in the FICD not function properly?
Follow Ups	Can the connector on the FICD solenoid be rotated? - ZXRider 21:09:13 03/07/20 Huh? FICD isn’t anywhere near the tranny tunnel. - jzack 00:00:49 03/08/20 My explanation isn’t clear - ZXRider 03:43:35 03/08/20 I switched over to the GM style J connectors to - jzack 11:08:12 03/08/20 Correction - see link below for connector... - jzack 11:13:25 03/08/20 Sweet. Thank you. For the time being I'm going to - ZXRider 12:11:47 03/08/20 Hated those stupid wire clips... (n/m) - jzack 19:30:32 03/08/20
Post a Followup	You cannot reply to this message because you are not logged in.