Subject	Timing belt question...probably has been asked...
Posted by	Shutoburner on January 03, 2020 at 9:24 AM
	This message has been viewed 238 times.
Message	Hi guys, doing my car’s timing belt. Has done it before on my other Z years ago, and don’t recall sprocket marks not lining up with back plate. The Passenger side sprocket marks are both off by a tooth. Cog spacing on the belt seem fine. The car was running sort of rich in recent days, but does this mean the timing is off by a tooth on the passenger side? I believe I’ve read that the sprocket dots must line up when at TDC.
Follow Ups	Timing belt question...probably has been asked... - Shutoburner 09:24:49 01/03/20 All that counts is that the cam gear and main crank - jzack 14:21:15 01/03/20 What if I took the sprockets off to do the seals for 120k - Shutoburner 15:13:20 01/03/20 Markings on back plate are just for gen’l guidance. - jzack 09:43:46 01/04/20 Thanks guys. It finally makes sense after putting things - Shutoburner 09:56:16 01/04/20
Post a Followup	You cannot reply to this message because you are not logged in.