Subject	Yoga and contoursionism.
Posted by	Spyder Z 15 on July 23, 2019 at 11:12 AM
	This message has been viewed 251 times.
In Reply To	Z1 Brass Shifter Bushing Install (In Car) posted by Z32Joshosaurus on July 23, 2019 at 12:40 AM
Message	If you want a short shifter, I would do it at the same time. I'm 6'8" and have replaced the shifter in the car and it was rough. Here is my write up from 14 years ago in my 2nd Z32. https://zmods.org/index.php?page=shortshift Z-Less for now Below is my last Z which last I heard became 1BADTTZs track Z __________________________ 1993 300ZX Slicktop 5 Speed. 1 of 87 1993 AJ4 Ultra Red Slicktops
Follow Ups	Z1 Brass Shifter Bushing Install (In Car) - Z32Joshosaurus 00:40:45 07/23/19 I did mine not too long ago. I did watch a Youtube video or - Woodnutz 06:27:25 07/23/19 Yoga and contoursionism. - Spyder Z 15 11:12:28 07/23/19 You really may not want to do this - Polish 19:15:44 07/29/19 Agreed that you have to be careful to not over-tighten, but - Woodnutz 12:47:33 08/01/19 I'd still recommend a set of OEM teflon the next time you're - Polish 00:31:28 08/03/19 Thanks for the input, Eric! As I mentioned, I have no point - Woodnutz 00:31:02 08/04/19 Have you considered the Z speed solid shifter bracket - Polish 18:44:25 08/05/19 There is a solution for that...... - itsa300zx 13:54:21 08/01/19 Agreed, I just installed this bushing in Silver Zed - vorpalZed 10:31:57 08/15/19
Post a Followup	You cannot reply to this message because you are not logged in.