Subject	Help Diagnosing No Fuel
Posted by	AnimalZTT (TX) on February 17, 2019 at 11:15 AM
	This message has been viewed 238 times.
Message	Attempting to bring the Z back to life after 4 years of no starts in the garage, would appreciate some help on diagnosing why it's not getting any fuel to the cylinders. What we have tested so far: Cleaned all PTU and CAS connectors Spark is good on at least two cylinders No ECU codes Fuel is getting pressure at least to the new filter Fuel pump is pumping When we spin the CAS I do not hear the injectors clicking and cylinders are visually dry looking through spark hole Should I feel/hear a physical clicking in the CAS when I spin it? Because it spins smooth. What else? Thank you. ~Animal '91 ZTT
Follow Ups	Help Diagnosing No Fuel - AnimalZTT (TX) 11:15:42 02/17/19 Fooled around a little more and I believe I hear injector... - AnimalZTT (TX) 12:07:00 02/17/19 Re: Fooled around a little more and I believe I hear injector... - Metacom 20:18:25 02/17/19 Pulled an easy to get to one and right at 13 ohms (n/m) - AnimalZTT (TX) 20:29:54 02/17/19 So fuel is getting through the damper and pressure is... - AnimalZTT (TX) 09:43:16 02/19/19 Re: So fuel is getting through the damper and pressure is... - Metacom 12:40:29 02/19/19 Drained and filled tank with new gas. I tried this... - AnimalZTT (TX) 12:20:45 02/20/19 Re: Drained and filled tank with new gas. I tried this... - Metacom 14:08:35 02/20/19 Drained and filled tank with new gas. I tried this... - AnimalZTT (TX) 15:25:30 02/20/19 Figured out the solution... - AnimalZTT (TX) 11:30:02 02/26/19
Post a Followup	You cannot reply to this message because you are not logged in.