Subject	Re: Have you verified that the TPS is set correctly?
Posted by	Vert93 (MN) on September 15, 2018 at 6:33 PM
	This message has been viewed 250 times.
In Reply To	Have you verified that the TPS is set correctly? (n/m) posted by CarolinaZ_TT on September 06, 2018 at 07:09 AM
Message	Yep, that is set correctly. But I had a spare TPS. So I put it on just to make sure, since it's easy to replace. See above. The idle seems to be fixed. But the brake lights issue remains, albeit a little different.
Follow Ups	TT won't idle at same time as brake, and stop/tail warning - Vert93 (MN) 17:18:20 09/03/18 Is the 'Gang Point' Ground hookedup at the back of the Penum (n/m) - Cjw3 19:04:28 09/03/18 There are 2 grounds hooked up on the back of the plenum. - Vert93 (MN) 20:57:00 09/03/18 Re: There are 2 grounds hooked up on the back of the plenum. - Metacom 22:38:46 09/04/18 Can you explain more on what happens when it "wont idle"? - Polish 12:21:55 09/04/18 It will just barely run @ about 550 rpm. And within seconds, - Vert93 (MN) 17:54:57 09/04/18 Re: It will just barely run @ about 550 rpm. And within seconds, - TheKryptKeeper 21:53:34 09/04/18 Sounds like... - GrecV2 06:47:10 09/05/18 Idle is now good. Brake lights come on during acceleration. - Vert93 (MN) 18:31:23 09/15/18 Have you verified that the TPS is set correctly? (n/m) - CarolinaZ_TT 07:09:07 09/06/18 Re: Have you verified that the TPS is set correctly? - Vert93 (MN) 18:33:59 09/15/18
Post a Followup	You cannot reply to this message because you are not logged in.