Subject	300zx tt dies after high rev
Posted by	Lowlife1998 on April 14, 2018 at 11:26 AM
	This message has been viewed 303 times.
Message	So I recently replaced all my injectors with new style injectors and also did egr delete and pcv delete and added a catch can after I did all that my z will struggle to turn on... sometimes it’ll turn on and just die so id have to press the gas a little then let off for it to stay on but whenever ever I’m driving and rev up to around 4k rpms and let off it’ll stall anyone know why it does that? It’s runs fine no hesitation
Follow Ups	300zx tt dies after high rev - Lowlife1998 11:26:26 04/14/18 Depending on how you rputed the catchcan you may be... - kickerzx 11:44:58 04/14/18 Re: Depending on how you rputed the catchcan you may be... - Lowlife1998 12:33:15 04/14/18 Check for lean cond. via O2 diagnostic on ecu n check plugs (n/m) - Zbruh92 14:49:47 04/14/18 Re: Check for lean cond. via O2 diagnostic on ecu n check plugs - Lowlife1998 15:26:24 04/14/18 FPR or perhaps clogged fuel filter? I’d test fuel pressure (n/m) - Zbruh92 18:17:06 04/14/18 At vacuum the pcv valves normaly put a vakuum - kickerzx 14:56:07 04/14/18 Re: At vacuum the pcv valves normaly put a vakuum - Lowlife1998 15:27:35 04/14/18 Re: At vacuum the pcv valves normaly put a vakuum - Lowlife1998 19:37:21 04/14/18 In that case look for pinched orings on your newly installed - kickerzx 02:02:49 04/15/18 Re: In that case look for pinched orings on your newly installed - Lowlife1998 10:12:48 04/15/18
Post a Followup	You cannot reply to this message because you are not logged in.