Subject	Re: Need some suggestions
Posted by	Metacom on August 22, 2017 at 4:11 PM
	This message has been viewed 431 times.
In Reply To	Need some suggestions posted by frustrated on August 22, 2017 at 03:37 PM
Message	Yah, pretty easy to OHM test the injectors. Mark the CAS position and pull it out, spin it, and listen if each injector is clicking. Some might be full dead or very very quite. Should be a clear audible click from each. Also check for codes.
Follow Ups	Need some suggestions - frustrated 15:37:23 08/22/17 Re: Need some suggestions - Metacom 16:11:41 08/22/17 Re: Re: Need some suggestions - frustrated 20:18:15 08/27/17 Gummed up injectors wouldn't be much of a surprise after - jzack 16:20:07 08/22/17 Re: Gummed up injectors wouldn't be much of a surprise after - frustrated 01:04:06 08/23/17 YES - Cjw3 06:13:09 08/23/17 Yes, pull it. For a car not run in so long you'll be glad - jzack 22:02:08 08/23/17 If Phillips + gets mangeled I have used vice grips in a >> - ZUL8TR 04:17:49 08/24/17 Re: If Phillips + gets mangeled I have used vice grips in a >> - frustrated 20:11:47 08/27/17 TB's can stay on, 8 bolts hold plenum to lower manifold (n/m) - ZUL8TR 02:18:57 08/28/17 I like to use a t handle driver - Mike Riddle 07:09:49 08/24/17
Post a Followup	You cannot reply to this message because you are not logged in.