Subject	Re: Sorry, forgot to add. If you provide a ground path using a
Posted by	Potacka on July 27, 2017 at 11:05 AM
	This message has been viewed 412 times.
In Reply To	Sorry, forgot to add. If you provide a ground path using a posted by jzack on July 27, 2017 at 06:02 AM
Message	Problem is new, no accidents I haven't been doing any work on the car. Other than the following: few months ago the horn fuse blew, I replaced the clock spring horn worked for a short time. I assumed it was another bad clock spring and replaced it again however when I tried horn it didn't work and the fuse hadn't blown. Swapped the clock spring back still nothing. I get continuity thu the clock spring (both of them). The horn buttons test good and like I said I'm getting voltage at the relay socket when the horn button is pressed. I will try your suggestions and report back. Adam
Follow Ups	Horn relay not pulling in - Potacka 16:38:18 07/25/17 The first thing I'd do is peek behind the dash around the - jzack 08:42:16 07/26/17 Re: The first thing I'd do is peek behind the dash around the - Potacka 11:44:14 07/26/17 hows the ground at the horn? can you sound the horn by - itsa300zx 12:06:00 07/26/17 Re: hows the ground at the horn? can you sound the horn by - Potacka 20:06:09 07/26/17 Relay having 12v makes no difference since the horn buttons - jzack 05:52:03 07/27/17 Sorry, forgot to add. If you provide a ground path using a - jzack 06:02:36 07/27/17 Re: Sorry, forgot to add. If you provide a ground path using a - Potacka 11:05:25 07/27/17
Post a Followup	You cannot reply to this message because you are not logged in.