Subject	Engine install clearance issue with steering linkage
Posted by	Nefarial on July 18, 2017 at 10:15 AM
	This message has been viewed 495 times.
Message	I have been trying to get my 91TT RHD up and running and slowly installing the engine and tranny as one piece its gotten down to that last few inches but now the exhaust outlet on the drivers side turbo is hitting on the steering linkage that goes from the knuckle up to inside the firewall and steering wheel. This linkage also was not able to be removed no matter what was tried. any help would be appreciated. the engine is all the way that it can be pushed to the passenger side and even tried tilting it a bit by changing the chains.
Follow Ups	Engine install clearance issue with steering linkage - Nefarial 10:15:13 07/18/17 Re: Engine install clearance issue with steering linkage - SammybTT(TN) 21:30:11 07/18/17 That joint gets corroded over the years and gets - Tanley (ATL) 21:39:57 07/18/17 I used a pry bar and a dead blow hammer to break mine loose - -Grimm- 11:53:02 07/19/17
Post a Followup	You cannot reply to this message because you are not logged in.