Subject	I'll look into this.
Posted by	OverZealous (CT) on July 03, 2017 at 10:47 AM
	This message has been viewed 479 times.
In Reply To	PS: I pay about $4.00 per 3.7 oz tube at local stores. posted by ZUL8TR on July 03, 2017 at 04:41 AM
Message	Thanks, Pete. I really appreciate you chiming in! The only problem I have with your approach is that I'd rather not remove the intake plenum just to get to the valve covers and as such cleaning the elbow surfaces is rather complicated. FML! BTW, I've got to re-attach the rubber to the plastic top grill cowls (by windshield). What glue do you recommend to get that job done? OverZealous (CT) My General posts (click)
Follow Ups	Valve Cover PCV Elbow Oil Mist Problem - OverZealous (CT) 20:22:06 07/02/17 JB Weld it. (n/m) - MixManMash 20:29:37 07/02/17 Doesn't work. - OverZealous (CT) 21:02:15 07/02/17 If engine bay looks aren't important maybe they can be zip - jzack 22:00:48 07/02/17 Nope. I thought of that too. - OverZealous (CT) 23:39:18 07/02/17 You might have better luck with a flexible sealant>> - ZUL8TR 04:33:21 07/03/17 PS: I pay about $4.00 per 3.7 oz tube at local stores. - ZUL8TR 04:41:05 07/03/17 I'll look into this. - OverZealous (CT) 10:47:01 07/03/17 E6000 just clean surfaces to glue with lacquer thinner (n/m) - ZUL8TR 01:25:48 07/04/17 You're right about the crazy Amazon prices! Thanks. (n/m) - OverZealous (CT) 21:18:13 07/04/17 Xcuse, l I didn't know what Lbow you were referring to. (n/m) - ZUL8TR 04:46:05 07/05/17
Post a Followup	You cannot reply to this message because you are not logged in.