Subject	Block and heads were milled..
Posted by	Doug71zt(CAN) on May 08, 2017 at 1:08 AM
	This message has been viewed 420 times.
In Reply To	I wonder if the block was decked and cylinder heads posted by MixManMash on May 07, 2017 at 09:49 PM
Message	supposedly to the minimum required. Done at the shop that does my work, so they have experience with the VG and have never done me wrong. The timing belt is installed correctly, timing marks lined up on the new BDE timing marks. Gasket kit was OEM Nissan, including the heads.
Follow Ups	Timing belt not tight, tensioner at the end of slots? - Doug71zt(CAN) 21:26:19 05/07/17 I wonder if the block was decked and cylinder heads - MixManMash 21:49:41 05/07/17 Block and heads were milled.. - Doug71zt(CAN) 01:08:38 05/08/17 Did you compensate with thick head gaskets? (n/m) - -Grimm- 09:34:16 05/10/17 You wont have a problem lining up the timing marks... - -Grimm- 09:40:02 05/10/17 Re: Timing belt not tight, tensioner at the end of slots? - ooofoo 09:45:49 05/08/17
Post a Followup	You cannot reply to this message because you are not logged in.