Subject	Re: you've done all the Easy Stuff.. Now lets hunt..
Posted by	str86z on August 23, 2016 at 11:57 PM
	This message has been viewed 202 times.
In Reply To	you've done all the Easy Stuff.. Now lets hunt.. posted by Cjw3 on August 23, 2016 at 08:18 PM
Message	@cjw3 I'm up to try wtv, to avoid sending it back to aamco. Now you could be on to something, but if timing was off then wouldn't the whole thing (3,4,5,6) be off too. How could I verify with a timing light, or maybe rotating CAS slightly whiles it's idling, i would get some life out of 1 & 2. Would it need to be clock or counter clockwise turn?
Follow Ups	Z32 cylinder 1 & 2 dead - str86z 23:19:56 08/22/16 Re: Z32 cylinder 1 & 2 dead - Stokens (AR) 14:06:26 08/23/16 Re: Re: Z32 cylinder 1 & 2 dead - str86z 23:50:30 08/23/16 Re: Re: Z32 cylinder 1 & 2 dead - str86z 03:44:20 08/24/16 That is quite a bit of green stuff! - Stokens (AR) 16:42:32 08/24/16 you've done all the Easy Stuff.. Now lets hunt.. - Cjw3 20:18:21 08/23/16 Maybe try visual verifying that the PTU wiring color codes - jzack 21:37:54 08/23/16 Re: Maybe try visual verifying that the PTU wiring color codes - str86z 00:03:54 08/24/16 Re: you've done all the Easy Stuff.. Now lets hunt.. - str86z 23:57:55 08/23/16 Re: Re: you've done all the Easy Stuff.. Now lets hunt.. - str86z 04:13:23 08/24/16 i would look into the corrosion issue as posted above, - itsa300zx 08:28:40 08/24/16 I would solder the subharness into the main harness - -Grimm- 09:47:31 08/24/16 Re: I would solder the subharness into the main harness - str86z 19:29:58 08/24/16 Depends on your test conditions, but yes - -Grimm- 09:45:18 08/25/16 Re: Depends on your test conditions, but yes - str86z 01:15:58 08/26/16 How did you test the injectors? (n/m) - -Grimm- 13:36:23 08/26/16 Agreed. Starting to sound more like failing injectors. (n/m) - Stokens (AR) 17:24:39 08/26/16 Re: Agreed. Starting to sound more like failing injectors. - str86z 19:02:43 08/26/16 Videos of my tests on cyl. 1 & 2 - str86z 08:58:49 08/27/16 Re: Videos of my tests on cyl. 1 & 2 - str86z 13:30:36 08/28/16 Re: Videos of my tests on cyl. 1 & 2 - str86z 20:07:34 08/28/16 Hard to tell, maybe just the frame rate, but are they... - -Grimm- 13:48:58 08/29/16 Re: Hard to tell, maybe just the frame rate, but are they... - str86z 16:07:43 08/29/16 Start with checking the wire colors vs ECCS - -Grimm- 17:39:45 08/29/16 Re: Start with checking the wire colors vs ECCS - str86z 21:38:32 08/29/16 *VIDEO* Timing questions - str86z 21:44:33 08/31/16 Re: Videos of my tests on cyl. 1 & 2 - str86z 03:04:25 09/02/16 Suggestions I am so close - str86z 00:32:41 09/03/16 Re: Videos of my tests on cyl. 1 & 2 - str86z 04:19:57 09/06/16
Post a Followup	You cannot reply to this message because you are not logged in.