Subject	you've done all the Easy Stuff.. Now lets hunt..
Posted by	Cjw3 on August 23, 2016 at 8:18 PM
	This message has been viewed 252 times.
In Reply To	Z32 cylinder 1 & 2 dead posted by str86z on August 22, 2016 at 11:19 PM
Message	From what you've said, you have everything needed to make the Cylinders Fire, but they are not.. 1) You have Compression 2) You Have Fuel 3) You Have Spark It Should be running.. If you have all Three Components to make it run and it's NOT, then the Spark is at the wrong time.. I can see no Other Conclusion from your Facts.. Pull the Coil Packs.. all six.. Lay them on the Plenum with Spark plugs in them.. With the Plugs Grounded.. Pull the CAS.. with the ignition switch on, rotate the CAS and watch the Firing Order of the Plugs.. It's 1-2-3-4-5-6.. I'm guessing SOMEHOW 3-4-5-6 is proper but 1-2 is somehow screwed up.. I can not see how that can happen.. but thats all I got.. Cj
Follow Ups	Z32 cylinder 1 & 2 dead - str86z 23:19:56 08/22/16 Re: Z32 cylinder 1 & 2 dead - Stokens (AR) 14:06:26 08/23/16 Re: Re: Z32 cylinder 1 & 2 dead - str86z 23:50:30 08/23/16 Re: Re: Z32 cylinder 1 & 2 dead - str86z 03:44:20 08/24/16 That is quite a bit of green stuff! - Stokens (AR) 16:42:32 08/24/16 you've done all the Easy Stuff.. Now lets hunt.. - Cjw3 20:18:21 08/23/16 Maybe try visual verifying that the PTU wiring color codes - jzack 21:37:54 08/23/16 Re: Maybe try visual verifying that the PTU wiring color codes - str86z 00:03:54 08/24/16 Re: you've done all the Easy Stuff.. Now lets hunt.. - str86z 23:57:55 08/23/16 Re: Re: you've done all the Easy Stuff.. Now lets hunt.. - str86z 04:13:23 08/24/16 i would look into the corrosion issue as posted above, - itsa300zx 08:28:40 08/24/16 I would solder the subharness into the main harness - -Grimm- 09:47:31 08/24/16 Re: I would solder the subharness into the main harness - str86z 19:29:58 08/24/16 Depends on your test conditions, but yes - -Grimm- 09:45:18 08/25/16 Re: Depends on your test conditions, but yes - str86z 01:15:58 08/26/16 How did you test the injectors? (n/m) - -Grimm- 13:36:23 08/26/16 Agreed. Starting to sound more like failing injectors. (n/m) - Stokens (AR) 17:24:39 08/26/16 Re: Agreed. Starting to sound more like failing injectors. - str86z 19:02:43 08/26/16 Videos of my tests on cyl. 1 & 2 - str86z 08:58:49 08/27/16 Re: Videos of my tests on cyl. 1 & 2 - str86z 13:30:36 08/28/16 Re: Videos of my tests on cyl. 1 & 2 - str86z 20:07:34 08/28/16 Hard to tell, maybe just the frame rate, but are they... - -Grimm- 13:48:58 08/29/16 Re: Hard to tell, maybe just the frame rate, but are they... - str86z 16:07:43 08/29/16 Start with checking the wire colors vs ECCS - -Grimm- 17:39:45 08/29/16 Re: Start with checking the wire colors vs ECCS - str86z 21:38:32 08/29/16 *VIDEO* Timing questions - str86z 21:44:33 08/31/16 Re: Videos of my tests on cyl. 1 & 2 - str86z 03:04:25 09/02/16 Suggestions I am so close - str86z 00:32:41 09/03/16 Re: Videos of my tests on cyl. 1 & 2 - str86z 04:19:57 09/06/16
Post a Followup	You cannot reply to this message because you are not logged in.