Subject	No fire on cylinder 4?
Posted by	.z on July 05, 2016 at 3:25 PM
	This message has been viewed 288 times.
Message	I have a 96 TT. Number 4 threw a misfire code a few weeks ago. I changed the coil pack and it cleared up. Today, same problem on number 4. Tried new coil and plug already. Reads 12v at the coil plug connector. It seems like it isn't getting a signal to fire, even with power present. Any ideas? Thanks in advance.
Follow Ups	No fire on cylinder 4? - .z 15:25:03 07/05/16 You've verified it's not an injector issue? Observed the - jzack 16:47:20 07/05/16 Re: You've verified it's not an injector issue? Observed the - .z 17:18:34 07/05/16 Step by step troubleshooting - -Grimm- 17:27:01 07/05/16 Re: Step by step troubleshooting - .z 17:41:43 07/05/16 Yes - -Grimm- 19:41:30 07/05/16 Re: Yes - .z 22:11:13 07/05/16 In my case the wires themselves were corroded pretty badly - -Grimm- 01:03:10 07/06/16 Re: In my case the wires themselves were corroded pretty badly - .z 22:25:29 07/06/16 Not in my experience - -Grimm- 09:47:53 07/07/16 Re: Not in my experience - .z 22:21:50 07/07/16 Did you happen to mess with the ECU recently? ECU sends - jzack 20:56:51 07/05/16
Post a Followup	You cannot reply to this message because you are not logged in.