Subject	Yes if they're stuck open, OEM ones a $5 so I'd replace them
Posted by	Stanky on June 29, 2016 at 9:18 PM
	This message has been viewed 219 times.
In Reply To	What about bad PCV valves, could they cause this? (n/m) posted by YlwPrlZTT on June 29, 2016 at 07:22 PM
Message	How much PSI are you using to boost leak test? If you have the stock PCV system you should not be going more than 5psi. Id do a compression test just to verify how all the cylinders are doing, and go from there.
Follow Ups	Final verdict on my issues. I'm posting a new thread as for - YlwPrlZTT 15:25:48 06/29/16 For my own benefit... - -Grimm- 19:09:35 06/29/16 Yeah I figured something is up. Right now there are 150K on - YlwPrlZTT 19:20:39 06/29/16 Could be leakdown (past the piston rings), PCV valves (n/m) - -Grimm- 10:42:50 06/30/16 What about bad PCV valves, could they cause this? (n/m) - YlwPrlZTT 19:22:26 06/29/16 Yes if they're stuck open, OEM ones a $5 so I'd replace them - Stanky 21:18:08 06/29/16 Yes I put about 5 psi in. I will change the PCV valves and - YlwPrlZTT 21:52:02 06/29/16 Also, I would block off the accordion to valve cover hose. - puchy 09:42:22 07/02/16
Post a Followup	You cannot reply to this message because you are not logged in.