Subject	thank you for your wisdom, can you help me understand?
Posted by	surfer31337 on June 20, 2016 at 7:45 PM
	This message has been viewed 273 times.
In Reply To	Thanks.. Just what I needed posted by Cjw3 on June 20, 2016 at 09:12 AM
Message	will this get at the root of the problem? do you not suspect injector leak? or is this is a workaround? i would think the throttle bodies would be adjusted properly at the factory. is it possible the guy who owned the car before me mis-adjusted the throttle bodies? when i first got the car, it had a bad EGR valve, so when i plugged it, and fixed the boost leaks, the car ran a lot better, but never quite right. the idle was too high, so i lowered it to 700 using the screw. i'm going to try what you said, it's possible the previous owner adjusted them wrong.
Follow Ups	rich idle, will soon remove/install injectors w/new o-rings - surfer31337 20:32:05 06/17/16 Your image is not showing (n/m) - YlwPrlZTT 21:25:38 06/17/16 try this - surfer31337 21:50:40 06/17/16 Run a Power balance Test.. Post the Result - Cjw3 22:59:26 06/17/16 here's a video - surfer31337 23:15:42 06/19/16 Thanks.. Just what I needed - Cjw3 09:12:23 06/20/16 thank you for your wisdom, can you help me understand? - surfer31337 19:45:01 06/20/16 Idle is difficult on these cars. - Cjw3 21:09:12 06/20/16 here's another video of power balance test - surfer31337 16:16:11 06/21/16 All looks Good there - Cjw3 17:38:22 06/21/16 i was told this ROM is on the "lean" side, so i tend to - surfer31337 17:07:03 06/21/16 Injectors installed and the ECU K-value - jerdobi 23:04:27 06/19/16 Re: Injectors installed and the ECU K-value - surfer31337 23:17:26 06/19/16 TunerPro will read the ROM dump - jerdobi 23:27:36 06/20/16 Tuner Pro is great Program.. - Cjw3 09:29:57 06/21/16 awesome thank u! (n/m) - surfer31337 17:08:41 06/21/16 here is my k-value (i think) 288 - surfer31337 17:31:20 06/21/16 Double click the Injector K Value - jerdobi 21:00:03 06/21/16 ok, done, yea it's 288 (n/m) - surfer31337 21:59:31 06/21/16
Post a Followup	You cannot reply to this message because you are not logged in.