Subject	Definite boost leak
Posted by	YlwPrlZTT on June 19, 2016 at 5:15 PM
	This message has been viewed 369 times.
Message	Ok so an update on my issue, unfortunately the shops compressor broke down so I wasn't able to put 5 psi into the intake, but I did blow into the tube as hard as I could, lol. Yeah I know, I know. Anyway, just by blowing into the tube I could hear a very obvious leak coming from the back of the engine near the top. My hoses are brand new as I replaced them during the last plenum pull. I wasn't able to pinpoint it though, I will get a compressor and do this properly again. Any idea what could be the issue back there?
Follow Ups	Definite boost leak - YlwPrlZTT 17:15:22 06/19/16 Missing balance tube o-ring? (n/m) - jzack 18:57:54 06/19/16 A compressor or smoke machine would be really helpful in - Goldchocobo 20:34:52 06/19/16 I'm getting a compressor tomorrow. It's not the balance tube - YlwPrlZTT 21:43:35 06/19/16 The leak is somewhere around the EGR area but I can't see - YlwPrlZTT 22:23:27 06/19/16 My EGR is still there but the lines are capped off along - YlwPrlZTT 22:56:22 06/19/16 Intake plenum not seated correctly? - FrozTTy 08:44:10 06/20/16 That was my initial thinking. I might try to remove it next - YlwPrlZTT 14:28:13 06/20/16 Yes, the EGR valve stem leaks a little - OverZealous (CT) 21:33:54 06/21/16 I found the leaks, they're from they VTC solenoids??? - YlwPrlZTT 15:39:21 06/22/16 Would expect if air is leaking there's some oil coming out - jzack 18:59:56 06/22/16 Yeah there is some oil there, not a lot though. I have - YlwPrlZTT 19:30:24 06/22/16 This doesn't sound like a significant (air) leak. - OverZealous (CT) 09:29:25 06/27/16 I resealed my pax side intake valve cover and the VTC - YlwPrlZTT 17:23:39 06/27/16 Good luck! (n/m) - OverZealous (CT) 23:04:16 06/27/16 *UPDATE* This is getting interesting. Ok so the good news is - YlwPrlZTT 22:42:06 06/28/16
Post a Followup	You cannot reply to this message because you are not logged in.