Subject	Tach stopped working after auto to 5speed conversion
Posted by	BCs300z on June 15, 2016 at 2:35 PM
	This message has been viewed 291 times.
Message	Everything went just fine with the conversion. I have done these before, and it's my understanding that nothing in this swap should affect the tach, but it is not responding. Everything electrical with the auto --> 5speed is hooked up and working correctly. I have already testing the resistance between the ECU (pin7) and cluster (pin23), and the Y/R wire is g2g the whole way through. The only other thing that I changed out during the swap was the CAS. Any chance that has some sort of connection? I can't make one referencing the manual, but it seems logical. Any thoughts or help is valuable. -BC LaterZ, BCs300z
Follow Ups	Tach stopped working after auto to 5speed conversion - BCs300z 14:35:00 06/15/16 Gary aka: DVDBURN - ttz'in (norcal) 22:25:45 06/15/16 Why did you need to swap the CAS and what replacement... - DVDBURN (MD) 19:58:21 06/17/16 Re: Why did you need to swap the CAS and what replacement... - BCs300z 22:33:41 06/17/16 RESOLVED??? Sort of... - BCs300z 05:14:36 06/18/16 Have Gary bench test & repair your cluster (n/m) - Bernie (NoVA) 20:28:18 06/18/16 Will do. Thanks for the feedback and lead on a fix. (n/m) - BCs300z 21:59:02 06/20/16
Post a Followup	You cannot reply to this message because you are not logged in.