Subject	Re: You'd have to be missing a cam seal to lose 2 quarts.
Posted by	Dsouthz32 on April 26, 2016 at 2:52 AM
	This message has been viewed 281 times.
In Reply To	You'd have to be missing a cam seal to lose 2 quarts. posted by Bernie (NoVA) on April 26, 2016 at 12:41 AM
Message	Last compression check showed 120psi across the board. I immediately became worried but Kyle(IPP) who I bought motor from said 120-140psi Was normal range for a built motor. I thought it was still low but he's the expert. The car was shipped to SpecisltyZ and tuned by Seb whom has been very helpful. But the car is still running rich and dumping fuel causing me to burn oil. Dynosty will give it a shot tuning since they are familiar with Haltech. Worse case scenario would be needing new rings and smaller Bosch injectors. Will update this may 3rd after the Dyno tune.
Follow Ups	Running so rich burns 2 qts of oil? ID 2000cc related - Dsouthz32 14:56:12 04/22/16 If you aren't leaking oil - -Grimm- 17:55:18 04/22/16 Re: If you aren't leaking oil - Dsouthz32 21:17:56 04/22/16 You'd have to be missing a cam seal to lose 2 quarts. - Bernie (NoVA) 00:41:31 04/26/16 Re: You'd have to be missing a cam seal to lose 2 quarts. - Dsouthz32 02:52:03 04/26/16 Any leakdown test results? (n/m) - -Grimm- 15:43:22 04/27/16 Re: Any leakdown test results? - Dsouthz32 19:50:35 04/27/16
Post a Followup	You cannot reply to this message because you are not logged in.