Subject	Tension Rod Stud snapped?
Posted by	burntclutch on March 19, 2016 at 6:29 PM
	This message has been viewed 304 times.
Message	Hey guys, I was taking out my tension rods to press out and replace the bushings when one of the studs holding the tension rod to the front lower control arm snapped in two. I looked online and it said on the Z32 wikia that aftermarket tension rods require these studs to be hammered out of the stock rod and hammered into any new stock tension rods so I hammered that stud out and took it to a dealership to try to get a replacement. They told me there that the stud is actually part of the tension rod and is not supposed to come off, and my only option is to buy a 250$ tension rod from them. Is there any place I can order these studs/bolts online without paying for a whole new tension rod? I'm not sure how this part can be listed as part of the tension rod if it comes out and has to be replaced?
Follow Ups	Tension Rod Stud snapped? - burntclutch 18:29:25 03/19/16 find a used one... - itsa300zx 21:44:31 03/19/16 Re: find a used one... - burntclutch 02:34:45 03/20/16 companies do that>> - ZUL8TR 10:59:26 03/20/16 here is a new OEM one $129 free ship >>>>>>>>>> - ZUL8TR 11:29:33 03/20/16 Just get these for $75 and call it a day... - Ted (92TT) 12:39:56 03/20/16 That is a good deal, if mine blow I will get the ES kit >... - ZUL8TR 14:46:23 03/20/16 I have solids, but I'd expect some additional harshness... - Ted (92TT) 23:38:58 03/20/16 I have plenty of the stock TR studs if you need some. (n/m) - Bernie (NoVA) 09:08:20 03/21/16
Post a Followup	You cannot reply to this message because you are not logged in.