Subject	Holy Smokes this sounds very close to the issue i cant solve
Posted by	SuparexTT on February 17, 2016 at 3:35 PM
	This message has been viewed 262 times.
In Reply To	Question about clutch issue posted by BannonZ on December 04, 2015 at 01:53 PM
Message	I did a NA/TT swap. -replaced clutch -replaced master -replaced slave -replace throw out bearing -replaced with the stiffer 350z fork -later switched to the ZSpeed tranny/shifter brace -tried both stock and stillen shifters -still have the fender bleed point I've learned to drive my quirky car, but it's acting like there is air in the line when there is none...that i can find. 1. on occasion i'll get locked into gear, normally 1st or reverse 2. sometimes i'll get locked out of gear when shifting 3. if i don't hesitance shifting, sometime it'll grind. 4. I have to be in neutral when the car is stopped. 5. some say it's the tranny. 6. some say it's not the tranny. 7. some say it drives fine. 8. I'll lose my mind if i think about it to much. ==CZC4LIFE==
Follow Ups	Question about clutch issue - BannonZ 13:53:05 12/04/15 What's Bernie's opinion ? (n/m) - ttz'in (norcal) 14:09:51 12/04/15 I have not reached out to him directly. I figured I would - BannonZ 14:33:55 12/04/15 First thought is air in the system. (n/m) - ttz'in (norcal) 14:52:58 12/04/15 2nd (n/m) - Evan(CA) 02:31:01 12/05/15 Stock fork and pivot ball? (n/m) - BarryGZX 15:12:36 12/04/15 indeed - I have a Z 1 short throw on the shelf I am waiting - BannonZ 15:32:14 12/04/15 Im thinking along the same lines as Barry - -Grimm- 16:52:32 12/04/15 ^^^^Yep....This^^^^ could do it! (n/m) - BarryGZX 22:13:32 12/04/15 Happened to me.... - Stanky 11:23:19 12/05/15 I'd bleed the clutch and adjust the rod as per SZ - Zbullet 13:34:28 12/05/15 Correct. (n/m) - MixManMash 18:57:11 12/05/15 Holy Smokes this sounds very close to the issue i cant solve - SuparexTT 15:35:02 02/17/16
Post a Followup	You cannot reply to this message because you are not logged in.