Subject	This is from the FSM page 90 of the heating system
Posted by	YlwPrlZTT on January 14, 2016 at 1:30 PM
	This message has been viewed 431 times.
In Reply To	Which wires? (n/m) posted by -Grimm- on January 14, 2016 at 12:28 AM
Message	diagnostic procedure 6. Step "C" asks to check continuity between pins 30 on control amp harness and pin 30 on air mix door connector harness and the same for pin 31. There is continuity but from pin 30 to 31 and and 31 to 30. Also wires 32 and 36 on the air mix door harness connector are reversed, the FSM shows w/r wire for pin 32 and b/w for 36. The connector is reversed in the car, w/r is pin 36 and b/w is 32.
Follow Ups	FSM Wiring Diagram - YlwPrlZTT 21:27:56 01/13/16 Which wires? (n/m) - -Grimm- 00:28:02 01/14/16 This is from the FSM page 90 of the heating system - YlwPrlZTT 13:30:35 01/14/16 *Update* The wires seem to be fine, I installed the new - YlwPrlZTT 15:52:10 01/14/16
Post a Followup	You cannot reply to this message because you are not logged in.