Subject	Re: TPS problems
Posted by	Rob260 on January 10, 2016 at 1:06 AM
	This message has been viewed 565 times.
In Reply To	TPS problems posted by Rob260 on January 09, 2016 at 11:47 PM
Message	Have checked that the throttle bodies are in the "closed" position -they are and they are sealed tight. I've found that if I remove the TPS and rotate the plastic gear with a screwdriver I can get it to a position that outputs .5v, however this is about 180* out from where it needs to be to fit onto the throttle body cam. I've checked the position of the cam against that on a known working motor and they are the same.
Follow Ups	TPS problems - Rob260 23:47:06 01/09/16 Re: TPS problems - Rob260 23:52:13 01/09/16 Re: TPS problems - Rob260 01:06:47 01/10/16 Re: TPS problems - Rob260 01:45:31 01/10/16 Re: TPS problems - Rob260 02:20:22 01/10/16 Now hat you fixed it the correct setting for the TPS is not> - ZUL8TR 03:53:17 01/10/16 Re: Now hat you fixed it the correct setting for the TPS is not> - Rob260 02:05:38 01/14/16 The correct setting is not in the middle, if it winds >>> - ZUL8TR 10:19:58 01/14/16
Post a Followup	You cannot reply to this message because you are not logged in.