Subject	That is the kit that I used. I didn't get either the 360
Posted by	xpwarrior on August 04, 2015 at 3:51 PM
	This message has been viewed 194 times.
In Reply To	I am talking with them now. This is the link they provided: posted by J-Mart on August 04, 2015 at 10:47 AM
Message	thrust plate or the gapless ring just the stock stuff. I don't think they had the gapless ring at the time or I would have considered it. I went directly to their shop to get my kits since they are in Arkansas and not too far away. They were really nice to talk to and very knowledgeable. A little over 2 years and 50k miles later both turbos are working great but that depends a lot on the condition of the turbo to start with. I think there is information about the T28 mod out there just need to google it.
Follow Ups	Stock turbo inspection procedure. - J-Mart 21:46:20 08/01/15 Take them apart to clean and inspect everything. - xpwarrior 22:27:58 08/02/15 What do you mean when you say "a good quality kit"? (n/m) - J-Mart 23:07:10 08/02/15 Get a kit from the Gpop Shop. Avoid the Ebay kits. - xpwarrior 08:58:34 08/03/15 Do you know which kit would work with stock turbos? Have you - Lone Z'er(CO) 18:38:33 08/03/15 I am talking with them now. This is the link they provided: - J-Mart 10:47:02 08/04/15 Let me know what you find out. I emailed them and they, - Lone Z'er(CO) 14:53:35 08/04/15 Z1 has fully assembled turbos with new CHRA's for 595 ea - -Grimm- 16:50:53 08/04/15 Like. Unless you're especially attached to stock turbos. (n/m) - Zuberman 02:04:08 08/05/15 That is the kit that I used. I didn't get either the 360 - xpwarrior 15:51:01 08/04/15 I take it you performed the overhaul yourself and didn't pay - J-Mart 07:23:03 08/05/15 Yes I rebuilt them myself. - xpwarrior 19:40:34 08/05/15 Sounds like the CHRA option is going to be cost prohbitive: - J-Mart 08:08:00 08/07/15 Yes going through Gpop for a CHRA is expensive. - xpwarrior 14:54:51 08/07/15
Post a Followup	You cannot reply to this message because you are not logged in.