Subject	Thanks guys! I'm on it. :) (n/m)
Posted by	Mikester(Seattle) on July 23, 2015 at 3:35 PM
	This message has been viewed 287 times.
In Reply To	1-4 were 14.5, 15.5, 24, 15 ohms. Haven't tested 5-6 but.. posted by Mikester(Seattle) on July 23, 2015 at 12:21 AM
Message
Follow Ups	Lacking power in my 91 NA. What's next to check? - Mikester(Seattle) 00:26:10 07/22/15 Timing 10 ? should be 15 +/- 2. What do the injectors ohm?>> - ZUL8TR 03:54:45 07/22/15 My mistake; 15 degrees. I haven't tested injectors yet.. - Mikester(Seattle) 13:13:03 07/22/15 drill a small hole in the center of the broken stud >>> - ZUL8TR 14:17:11 07/22/15 1-4 were 14.5, 15.5, 24, 15 ohms. Haven't tested 5-6 but.. - Mikester(Seattle) 00:21:52 07/23/15 Hot or cold the range is 10 to 14 ohms. You are above that - ZUL8TR 04:40:31 07/23/15 Replace those injectors. You've found a problem so tackle - flashstar 12:23:01 07/23/15 Thanks guys! I'm on it. :) (n/m) - Mikester(Seattle) 15:35:30 07/23/15
Post a Followup	You cannot reply to this message because you are not logged in.