Subject	Note: Looking in from the rocker panel behind
Posted by	ttz'in (norcal) on July 18, 2015 at 4:48 PM
	This message has been viewed 327 times.
In Reply To	If you have a pair, use both one for each front tire. posted by ttz'in (norcal) on July 18, 2015 at 04:40 PM
Message	each front tire you'll see a welded seam on the unibody frame rail. That's where you want to set your jack stands.
Follow Ups	Manual Transmission Oil Change Question >> - WE350Z 00:32:43 07/18/15 I cut the bottle cap so a hose can barely be forced through - -Grimm- 14:48:50 07/18/15 Ok that helps. Is the 85W really thick? Would think it >> - WE350Z 16:26:18 07/18/15 Autozone should be able to help. If not this is a - ttz'in (norcal) 16:05:44 07/18/15 I got one pair of planks - do I just need to raise the driver > - WE350Z 16:31:37 07/18/15 If you have a pair, use both one for each front tire. - ttz'in (norcal) 16:40:17 07/18/15 Note: Looking in from the rocker panel behind - ttz'in (norcal) 16:48:13 07/18/15 Yeah that pump that screws onto quart bottles seems ideal >> - WE350Z 16:50:53 07/18/15 Redline synthetic MT90 has worked well for many. - ttz'in (norcal) 17:02:12 07/18/15 I had a set of smaller jack stands and like a true dummy I > - WE350Z 17:15:18 07/18/15 If level when fluid just starts to overflow fill hole, it's - ttz'in (norcal) 17:22:21 07/18/15 Yeah may invest in the pump will be doing gear oil next... (n/m) - WE350Z 18:45:39 07/19/15 Also trying Nissan MTF 85W API GL-4 first too see if it >> - WE350Z 17:24:23 07/18/15 If Greg & Seb say it works....It works. - ttz'in (norcal) 17:27:45 07/18/15 Just tilt up the passanger side with drive on planks to >> - ZUL8TR 07:08:12 07/19/15 Great! Will try this method sounds easiest to me... (n/m) - WE350Z 18:40:01 07/19/15 One last Q - how long of a hose do I need? (n/m) - WE350Z 20:26:10 07/19/15 I use a long snoot auto tranny > - ZUL8TR 04:12:44 07/20/15
Post a Followup	You cannot reply to this message because you are not logged in.