Subject	Change the diffy lube. But only use a GL5 synthetic>>
Posted by	ZUL8TR on July 06, 2015 at 5:00 PM
	This message has been viewed 338 times.
In Reply To	I think I will try the Red Line MT-90 GL4 for the trans >> posted by WE350Z on July 06, 2015 at 02:21 PM
Message	There are many good GL5 lubes out there like: Mobil 1 75w 90, Castrol 75w 90, Redline 75w 90 (NOT MT 90), Lucus 75w 90, Valvoline 75w 90, etc. They do not need the viscous slip additive but most come with it and that is OK in the Z diffy will do no harm. I am assuming your diffy is in good shape and a higher viscosity isn't needed? Again look for any metal shavings in drain oil and on the drain plug. If the magnetic drain plug only has black thick fudge and not alot stuck on it that is OK, normal. ZUL8TR in Orlando,FL
Follow Ups	5SPD Manual Tranny - Stuck Shifter Cold + Grinding 4th Warm - WE350Z 18:05:30 07/02/15 The MT90 is a good choice many have used it with >> - ZUL8TR 03:19:46 07/04/15 I think I will try the Red Line MT-90 GL4 for the trans >> - WE350Z 14:21:52 07/06/15 Change the diffy lube. But only use a GL5 synthetic>> - ZUL8TR 17:00:09 07/06/15 Cool - then I guess I will change out the diffy lube too. > - WE350Z 17:15:08 07/06/15 Just to confirm here is what I am ordering -> - WE350Z 17:55:44 07/06/15 Correct. Note remove the fill plug first if it can't be >>> - ZUL8TR 05:30:03 07/07/15 I'm taking it down the street to a local lube joint that >> - WE350Z 14:47:46 07/07/15 Great overview of synchros - ChristopherTheOne 22:45:58 07/05/15 Thanks - this is very informative! I know the grinding is > - WE350Z 14:28:38 07/06/15 although I forgot the synchros material grinded off is brass - WE350Z 14:50:15 07/06/15 Any reason not to do both? - ChristopherTheOne 16:31:30 07/06/15 Got it. I'll take a gander at that and just do the fluid > - WE350Z 17:18:50 07/06/15
Post a Followup	You cannot reply to this message because you are not logged in.