Subject	I'm using a new-style Z1 shifter
Posted by	flashstar on July 05, 2015 at 11:13 PM
	This message has been viewed 454 times.
In Reply To	Your shifter bushings are probably too tight posted by Polish on July 05, 2015 at 05:25 PM
Message	I torqued the bushing bolt to the correct spec with a torque wrench. No idea what could be happening. Thanks for the idea.
Follow Ups	Anyone have a trick to perfectly align the Zspeed shifter - Tanley 20:41:00 07/01/15 2nd! I can't get mine set perfectly either (n/m) - flashstar 01:32:46 07/02/15 No suggestions, but make sure you have clearance. - Zbullet 20:21:16 07/02/15 I'll take a look, something is just not right with mine. - Tanley 08:44:20 07/03/15 2nd. It's hard to get into 1st and 5th on mine. The - flashstar 01:13:42 07/04/15 Your shifter bushings are probably too tight - Polish 17:25:35 07/05/15 I'm using a new-style Z1 shifter - flashstar 23:13:12 07/05/15 probably an interference problem between the shifter - aliaZ 22:03:21 07/07/15
Post a Followup	You cannot reply to this message because you are not logged in.