Subject	When you check the injector operation also ohm them >>
Posted by	ZUL8TR on June 04, 2015 at 3:32 AM
	This message has been viewed 273 times.
In Reply To	Don't think it's a pinched ring... posted by Auggie on June 03, 2015 at 12:46 PM
Message	The resistance will change with heat thus the 10 - 14 ohm acceptable range but one or more might be out of range? Also when you installed them did you do an off the engine pressure check for leaks at the tips as well as at the O rings on the fuel rail? I did this test when I replaced my injectors to new type and found one leaking at the tip and these were OEM parts, exchanged for another. You state that they are wholesale injectors does that mean not new or just cheaper or ....? ZUL8TR in Orlando,FL
Follow Ups	Won't Idle - Auggie 11:32:55 06/02/15 And I checked all accessible vacuum lines: good-to-go - Auggie 11:35:51 06/02/15 check the connectors on your IACV, again old harness - YlwPrlZTT 12:38:21 06/02/15 I originally cleaned the AAV spades way back when... - Auggie 12:38:30 06/03/15 Five year old fuel, seriously ? Hope it's not very - ttz'in (norcal) 14:27:26 06/02/15 Tank was over half-full - Auggie 09:50:15 06/03/15 Add some dry-gas, hopefully not too much water in lines (n/m) - FrozTTy 09:52:32 06/03/15 Ordered some Iso-Heet from Amazon. - Auggie 12:40:46 06/03/15 I would pull the plugs and inspect for excess fuel - spicyZ 12:32:53 06/03/15 Don't think it's a pinched ring... - Auggie 12:46:54 06/03/15 Have a boost leak tester? That'd be my next step. (n/m) - spicyZ 14:39:00 06/03/15 I assume you mean "vacuum" test? - Auggie 15:55:02 06/04/15 Not what I meant - spicyZ 21:21:48 06/04/15 When you check the injector operation also ohm them >> - ZUL8TR 03:32:38 06/04/15 "Wholesale" meaning I replaced all of them at once. - Auggie 15:32:13 06/04/15 Fresh fuel yet ? (n/m) - ttz'in (norcal) 16:54:52 06/04/15 You can check injector resistance at the ECU side - spicyZ 08:28:58 06/08/15 Sounds like the engine is flooding - DAYTONAZ 18:02:11 06/04/15 Running rich at idle would be a better description (n/m) - DAYTONAZ 18:10:25 06/04/15 Re: Won't Idle - kbilow 20:11:42 06/04/15 It really still sounds to me like a an electrical connection - YlwPrlZTT 23:32:43 06/04/15 Check Madkiwi's above SOLVED post for ideas (n/m) - OverZealous (CT) 21:38:28 06/05/15
Post a Followup	You cannot reply to this message because you are not logged in.