Subject	Re: Re: Re: Re: Re: stumble/hesitation problem
Posted by	CarolinaZ_TT on May 20, 2015 at 10:02 AM
	This message has been viewed 208 times.
In Reply To	Re: Re: Re: Re: stumble/hesitation problem posted by Potacka on May 19, 2015 at 09:36 AM
Message	Another thought, check the CAS connector pins (on the sensor itself, not the harness). I too installed a brand new EFI harness but the CAS pins were corroded and the connection not entirely solid. I noticed some stumbles approaching 2500-3000k as a result. A few days later, the connection slipped enough to shut the motor down completely while on the onramp to the highway. When I realized what the problem was, I knew the slipping connection was the culprit for the stumbles in the previous days. ***Formerly 'NCSU300ZXTT'***
Follow Ups	stumble/hesitation problem - Potacka 17:34:13 05/18/15 Re: stumble/hesitation problem - CarolinaZ_TT 17:57:22 05/18/15 Re: Re: stumble/hesitation problem - Potacka 19:02:50 05/18/15 Connector corrosion someplace, or possible wire - ttz'in (norcal) 19:21:23 05/18/15 Re: Connector corrosion someplace, or possible wire - Potacka 20:01:56 05/18/15 Re: stumble/hesitation problem - Duke51 21:12:16 05/18/15 Re: Re: stumble/hesitation problem - Potacka 21:46:26 05/18/15 Re: Re: Re: stumble/hesitation problem - Duke51 01:40:24 05/19/15 Re: stumble/hesitation problem - FrozTTy 21:41:04 05/18/15 Re: Re: stumble/hesitation problem - Potacka 21:52:37 05/18/15 Re: Re: stumble/hesitation problem - Potacka 21:53:14 05/18/15 Re: Re: Re: stumble/hesitation problem - CarolinaZ_TT 09:16:57 05/19/15 Re: Re: Re: Re: stumble/hesitation problem - Potacka 09:36:44 05/19/15 Re: Re: Re: Re: Re: stumble/hesitation problem - CarolinaZ_TT 10:02:05 05/20/15 You mentioned you changed the CAS and it was 90% better. - nonstopna 13:09:01 05/20/15 fixed - Potacka 18:24:11 05/20/15 I would install new oem fuel filter also (n/m) - FrozTTy 20:23:53 05/20/15
Post a Followup	You cannot reply to this message because you are not logged in.