Subject	EFI harness has group of three ground wires
Posted by	ttz'in (norcal) on April 26, 2015 at 11:37 AM
	This message has been viewed 682 times.
In Reply To	Re: Pull the Crossover Tube, and find your Grounds posted by Placuch on April 26, 2015 at 10:01 AM
Message	connecting at rear of plenum on driver side, and one at rear on passenger side. There is also a short ground wire from driver side rear of fuel rail to lower plenum. Odd bolt at rear of plenum with threads is to secure throttle cover. If you installed the SZ chip, recheck to be sure it seated correctly and no pins were bent.
Follow Ups	Crank, no start after injector upgrade. Help! Desperate! - Placuch 00:28:35 04/26/15 You can add a ground net system and it will take care >> - ZUL8TR 04:01:59 04/26/15 Re: You can add a ground net system and it will take care >> - Placuch 10:07:58 04/26/15 Extra grounds are like chicken soup they could improve >> - ZUL8TR 13:20:38 04/26/15 A properly wired car won't need a grounding system. (n/m) - Nate (NoVA) 23:40:30 04/27/15 Pull the Crossover Tube, and find your Grounds - Cjw3 09:16:16 04/26/15 Re: Pull the Crossover Tube, and find your Grounds - Placuch 10:01:09 04/26/15 EFI harness has group of three ground wires - ttz'in (norcal) 11:37:27 04/26/15 Good Call on the Chip.. - Cjw3 12:09:24 04/26/15 Re: Good Call on the Chip.. - Placuch 13:15:30 04/26/15 Notch on the Chip to the Center of the Board - Cjw3 17:29:45 04/26/15 Re: Notch on the Chip to the Center of the Board - Placuch 21:03:43 04/26/15 Generally the Chip is toast.. Board is fine.. - Cjw3 21:23:17 04/26/15 Re: EFI harness has group of three ground wires - Placuch 13:07:01 04/26/15 Re: EFI harness has group of three ground wires - Placuch 20:47:43 04/26/15 Sounds like EFI harness grounds are all good. - ttz'in (norcal) 20:20:42 04/27/15 Re: Sounds like EFI harness grounds are all good. - Placuch 23:56:38 04/27/15 Re: Sounds like EFI harness grounds are all good. - Placuch 07:47:54 04/28/15 I fixed it! - Placuch 07:30:01 04/29/15
Post a Followup	You cannot reply to this message because you are not logged in.