Just picked it up. The top three tubes were leaking, he was able to solder them up. He also mentioned the last bottom tube was also leaking and he touched it up. Furthermore, the plastic plug up top is leaking (I need to get the SS bolt for it) and it appears that the clamp on the inlet was not put on correctly as there are some residue on the pipe. Anywho, it is repaired and he mentioned that this is actually not as bad as he thought and I should be able to use the radiator without any problems. He recommended that I add a piece of wood as a support underneath to help the radiator not vibrate so much and to have it strapped down with good brackets so more tubes don't get damaged.