Subject	no to helicoil
Posted by	aliaZ on August 17, 2014 at 4:27 PM
	This message has been viewed 181 times.
In Reply To	Please Advise! Striped threads on the flywheel....FML posted by RRyderTT on August 16, 2014 at 05:43 PM
Message	these flywheels already have helicoils. If you pulled the helicoil out, the mating threads in the flywheel are damaged, you'll have to go to something bigger in OD. A timesert or some other type of solid insert will work, but you are likely out of luck if you think you can use a helicoil.
Follow Ups	Please Advise! Striped threads on the flywheel....FML - RRyderTT 17:43:39 08/16/14 Helicoil (n/m) - Ron(Houston) 18:20:55 08/16/14 Helicoil - -Grimm- 19:04:15 08/16/14 Re: Helicoil - RRyderTT 19:48:00 08/16/14 no to helicoil - aliaZ 16:27:15 08/17/14 Re: no to helicoil - Tech@EPR 18:18:19 08/17/14 This may be a dumb question.... - RRyderTT 22:01:24 08/17/14 IMO you don't want to mess with the balance - ThisIsSparTTa 09:16:30 08/18/14 You are right! Thanks for the advice. - RRyderTT 15:39:06 08/18/14
Post a Followup	You cannot reply to this message because you are not logged in.