Subject	Sounds like you are on the right track
Posted by	SammybTT(TN) on June 24, 2014 at 9:32 PM
	This message has been viewed 282 times.
In Reply To	Driveshaft is STUCK - Suggestions???? posted by Zbullet on June 24, 2014 at 07:20 PM
Message	I would use a pry bar which would reduce the flex that the screwdriver has and it is probably longer which would give you additional leverage in the limited space that you have. Good luck
Follow Ups	Driveshaft is STUCK - Suggestions???? - Zbullet 19:20:03 06/24/14 Maybe try lowering or raising the trans (n/m) - BarryGZX 20:08:03 06/24/14 Sounds like you are on the right track - SammybTT(TN) 21:32:29 06/24/14 unfortunately i cant get a pry bar in yet... - Zbullet 07:06:44 06/25/14 Ok, I have a couple of pry bars / alignment tools that would - SammybTT(TN) 11:56:24 06/25/14 Input shaft is probably frozen to the trans output - -Grimm- 09:30:30 06/25/14 Get a mallet and pound on it. (n/m) - ZaXxon 10:48:00 06/25/14 I had the same issue with two aftermarket 1-piece - Evan_Wright (Ca) 12:48:06 06/25/14 wow... I hope it doesnt come to that. fingers crossed. - Zbullet 16:50:51 06/25/14 Try removing the front diff bushing bolts and lowering - TriniTT 14:09:27 06/25/14
Post a Followup	You cannot reply to this message because you are not logged in.