Subject	I also figured I'd pressurize the fuel rail/injector
Posted by	Fly-Surf on June 24, 2014 at 12:19 PM
	This message has been viewed 238 times.
In Reply To	Always a good idea to lube the rings posted by -Grimm- on June 23, 2014 at 05:02 PM
Message	with the plug removed from that cylinder to ensure the O-ring is intact and not leaking/spraying. Probably going to add this to my "checklist" when using the Dremel method for injector replacement.
Follow Ups	Is "fuel hydrolock" always fatal? - Fly-Surf 06:16:00 06/23/14 I hydrolocked with no problems. But its a significant - kickerzx 09:00:50 06/23/14 Re: I hydrolocked with no problems. But its a significant - Fly-Surf 10:25:30 06/23/14 Correct (n/m) - kickerzx 11:35:07 06/23/14 That would about do it - -Grimm- 11:41:46 06/23/14 How about a few drops of oil directly in cylinder - Fly-Surf 15:01:44 06/23/14 Always a good idea to lube the rings - -Grimm- 17:02:37 06/23/14 I also figured I'd pressurize the fuel rail/injector - Fly-Surf 12:19:32 06/24/14 No lingering effects...car runs GREAT - Fly-Surf 18:09:25 06/28/14 i had a recent post about this same thing --- all ok (n/m) - The Devils Z 22:58:32 06/28/14
Post a Followup	You cannot reply to this message because you are not logged in.