Subject	There is no way the code was still in your ECU.
Posted by	DVDBURN (MD) on June 23, 2014 at 9:28 PM
	This message has been viewed 306 times.
In Reply To	I'm just going to keep adding things on here until... posted by -Grimm- on June 23, 2014 at 08:32 PM
Message	The ECU does not remember codes after removing the ECU (or disconnecting the battery). I would try that test with the other ECU two or three more times and see if you get the same results (code 51) each time you test with your ECU. If you get the same results then it sounds like something shorted when you had your ECU installed, your ECU was damaged which is now generating a code 51 and caused something external to the ECU to be bad which is why it still runs the same with Todd's ECU. www.mytwinturbo.com Nissan Data Voice - The first Nissan diagnostic software with a voice! Nissan Data Voice on YouTube Download my Nissan 300ZX Vin/Model Lookup.
Follow Ups	Code 51: Other ideas? - -Grimm- 19:22:39 06/19/14 Try running Resistance test from the ECU Plug. - Cjw3 19:46:08 06/19/14 I moved the 12V feed from constant to ECCS relay - -Grimm- 09:34:58 06/20/14 Resistance Check.. - Cjw3 22:31:50 06/23/14 Re: Resistance Check.. - -Grimm- 00:48:13 06/24/14 Also, I did measure resistance through the ECU plug... - -Grimm- 09:37:02 06/20/14 Well, since TTnet had been down I've had time to work - -Grimm- 00:56:27 06/23/14 I'm just going to keep adding things on here until... - -Grimm- 20:32:11 06/23/14 There is no way the code was still in your ECU. - DVDBURN (MD) 21:28:51 06/23/14 I wasn't sure how long the ECU could retain a code - -Grimm- 23:38:30 06/23/14 You're right - -Grimm- 00:49:29 06/24/14 Update inside - -Grimm- 00:33:30 06/26/14 Wow. That sucks. Good luck with it. (n/m) - DVDBURN (MD) 15:16:54 06/28/14 Here are some pictures - -Grimm- 14:46:00 06/26/14
Post a Followup	You cannot reply to this message because you are not logged in.