Subject	Re: New motor, need input on multiple issues. Overpumped Lifters
Posted by	coreymbassett on June 09, 2014 at 8:15 PM
	This message has been viewed 217 times.
In Reply To	New motor, need input on multiple issues. Overpumped Lifters posted by coreymbassett on June 09, 2014 at 08:12 PM
Message	I should probably have mentioned as well that the coils were all tested and fire properly. Havent confirmed if they fire properly in order, but they all develop a VERY healthy spark in each spark plug, and via a spark plug gap tester. Coils are on plug in valley of head, with stock rubber boot. I installed a spring to help keep the coil connected to top of the spark plug. Coils all have 12v, two earths and proper 5v signal wire.
Follow Ups	New motor, need input on multiple issues. Overpumped Lifters - coreymbassett 20:12:07 06/09/14 Re: New motor, need input on multiple issues. Overpumped Lifters - coreymbassett 20:15:52 06/09/14 Sounds like the Valve Stems were not shortened enough - Cjw3 20:19:11 06/09/14 Agreed - check valve stem length to see how far the valves - LitlElvis 07:06:29 06/10/14 valve stem height out of spec will cause that - aliaZ 12:04:26 06/10/14 are your 400+ cams legit? - aliaZ 12:27:05 06/10/14
Post a Followup	You cannot reply to this message because you are not logged in.