Subject	well they are marked with I's and E's
Posted by	tribalchild1 on June 02, 2014 at 1:42 PM
	This message has been viewed 138 times.
In Reply To	Cam caps posted by tribalchild1 on May 31, 2014 at 09:02 PM
Message	and I did install them as mentioned by Sammy. but after thinking about it I noticed the caps are interchangeable between DS exhaust cam and PS exhaust cam and also between intake cams. In other words I can take say cam cap E3 on one side and exchange it with cap E3 on the opposite side. it is also possible to take all the cam caps from one side and install them on the other side. Does it matter if you mix and match between exhaust cams and intake cams as long as you don't mix between exhaust and intake or am I screwed. the engine was rebuilt by a shop in phoenix about 20,000 miles ago I don't know if they do anything at the machine shops with cam caps or if it makes a difference? If worst comes to worse can I send the caps to a machine shop to get resurfaced or something or will I have to buy all new caps? thanks
Follow Ups	Cam caps - tribalchild1 21:02:59 05/31/14 The caps should be marked to show the location - SammybTT(TN) 21:43:23 05/31/14 Not all cam caps are marked - ThisIsSparTTa 09:21:01 06/02/14 well they are marked with I's and E's - tribalchild1 13:42:31 06/02/14 Mine were marked as you describe but the order - SammybTT(TN) 14:19:05 06/02/14 I also had a pile of cam caps - wickdGSXR 23:41:03 06/02/14 I called one of the local machine shop - tribalchild1 18:46:35 06/04/14 Sounds like you are making progress - SammybTT(TN) 09:43:13 06/08/14
Post a Followup	You cannot reply to this message because you are not logged in.